Beli end mill carbide di monotaro.id
/06P101000006-13.jpg)
/P102100233-1.jpg)
/P103061319-1.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
Mitsubishi Materials Carbide End Millatribut:- Material: Ultra ultra fine carbide
- monotaro TiAlN Coat 4 Flute Carbide End Mill, Gash Type (Mata Potong End Mill)Deskripsi:TiAlN coating is a heat-resistant coating, suitable for high-speed cutting and alloy casting, austenitic steel, etc. and processing of castings and nonferrous metals. -Because of the gash type, the cutting edge strength is high and chipping resistance is excellent.atribut:
- Material: Cemented Carbide
- LEXEES Endmill Carbide HRC45atribut:
- Material: Carbide HRC45
-
-
- OSG Hy-Pro Carbide End Mill 3 Flute High Helix Short with Coating (TA-SMG-EHS)Deskripsi:Hy-Pro Carbide End Mill High Helix Short With Premier Coating
- YG1 4G Mill 2 Flute Long End Millatribut:
- Overall Length: 60.00mm
- Shank Diameter: 6.00mm
- Material: Carbide
- NACHI Mata Bor Frais Ball End Karbid S CURIBRatribut:
- Number of Blades: 2
- Material: Carbide
- OSG Carbide 4-Blade Short End Mill (MG-EMS)atribut:
- Number of Blades: 4
- Material: Cemented carbide (CARBIDE)
- GESAC Solid Carbide Flat Endmill For GraphiteDeskripsi:Solid Carbide Flat Endmill, 2 Flute Standard Length.atribut:
- Product Group: Square Endmill
- Material: Carbide
- Coating: U-DIA
- Work Material: Graphite
- Helix Angle (°): 40
- SOMTA Solid Carbide 4 Flute End Mill UncoatedDeskripsi:Solid Carbide 4 Flute End MillsFor profile milling.atribut:
- Application: Direction of Cut
- Finish: Uncoated
- Flute Helix Angle: Right Hand Helix 30°
- Material: Solid Carbide (9-10% Cobalt, 0.2-0.8
- Recommended: Free Cutting Steel, Structural Steel, Plain Carbon Steel, Alloy Steel, Alloy Steel - Hardened, Cast Iron
- Shank type: Flattered Shank h6 Tolerance
- Standard: Works Standard Factory Specifications
- Tolerance on Cutting Diameter: h10
- Type: Type N Standard
- OSG Carbide End MillDeskripsi:WXL coating with high hardness and high lubrication. Works on wide range of materials, regular steels, Copper alloys, Recommended with lubrcations or dry milling.atribut:
- Material: Cemented carbide
- Number of Blades: 4
- Type: WXL-EMS
- Sherwood Carbide End Mill 4Flute StandardDeskripsi:Regular Series For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4. Metric Tolerances Diameter: Over 1.00 ~up to 6.00. Tolerance: +0.000, -0.050 Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080atribut:
- Standards Met: ANSI
- Number of Flutes: 4
- Finish/Coating: Bright
- Coolant Delivery: External
- Material: Solid Carbide
- Helix Angle: 30 Degree
- Plunge Type: Centre Cutting
- Flute Type: Helical
- Cutting Direction: Right Hand
- Shank type: Plain Round
- GESAC Solid Carbide Flat Endmill For SteelDeskripsi:Solid Carbide Flat Endmill, For Steel.atribut:
- Product Group: Square Endmill
- Number of Flutes: 4 Flute
- Material: Carbide
- Coating: TiAlCrSiN
- Work Material: Steel
- Applications: Side Milling
- Helix Angle (°): 30
- OSG Carbide End Millatribut:
- Total Length: 80mm
- Blade length: 33.0mm
- Shank Diameter: 12mm
- Blade Diameter: 11mm
- Effective Length: 36.3mm
- Material: Cemented Carbide
- EDP No.: 3182510
- MICRO 100 Finishing Carbide Square End MillDeskripsi:The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.atribut:
- UNSPSC: 23172005
- Cutting Direction: Right Hand
- Drilling Tool Configuration: Individual
- End Mill Application: Roughing/Finishing
- End Mill Cutting Type: Center Cutting
- End Mill Style: Square
- Helix Angle (°): 30
- List Number: GEM
- Material: Carbide
- Material Grade: C2 Micrograin
- Measurement System: Fractional Inch
- Shank type: Straight
- Single End/Double End: Single End
- LEXEES Endmill Carbide HRC55atribut:
- Material: Carbide HRC55
- LEXEES Endmill Carbide HRC65atribut:
- Material: Carbide HRC65
- Mitsubishi 2Flute Carbide Miracle End Millatribut:
- Surface Treatment: Miracle coating (VC)
- Twisting Angle: 30°
Daftar Harga end mill carbide Terbaru September 2025
| Mitsubishi Materials Carbide End Mill | Rp999.900 |
| monotaro TiAlN Coat 4 Flute Carbide End Mill, Gash Type (Mata Potong End Mill) | Rp139.900 |
| LEXEES Endmill Carbide HRC45 | Rp60.000 |
| OSG Hy-Pro Carbide End Mill 4 Flute Short | Rp179.900 |
| NACHI VG Mills Four Flutes Carbide End Mills - 9444 | Rp119.900 |
| OSG Hy-Pro Carbide End Mill 3 Flute High Helix Short with Coating (TA-SMG-EHS) | Rp389.900 |
| YG1 4G Mill 2 Flute Long End Mill | Rp559.900 |
| NACHI Mata Bor Frais Ball End Karbid S CURIBR | Rp2.499.900 |
| OSG Carbide 4-Blade Short End Mill (MG-EMS) | Rp1.399.900 |
| GESAC Solid Carbide Flat Endmill For Graphite | Rp619.900 |
Data diperbarui pada 05/09/2025 (Harga belum termasuk PPN)
Buka WhatsApp